LS-166/U

From RadioNerds
   
Jump to: navigation, search
LS-166 bw-1.png
The LS-166/U is used with the older style military radio sets which have a U-79/U audio connector. This is a standard magnetic speaker at 8 ohms at 3 watts. The speaker inclosure includes a 8:600 Ohm transformer to match the radio to the speaker. It has a switch located on the side to switch it between vehicle use and manpack. The connecting cord is terminated with the older style U-77/U connector.

You often find these speakers with the newer U-229 connector. It was quite common to cut off the old connector and replace it with a new one. Fundamentally though this speaker was not used with the new gear using the U-229 from the factory.


Contents

Images


Specifications

PHYSICAL DESCRIPTION
Cone Diameter - 4 inches (101.60 mm)
Mounting Dimensions - Adjustable mounting bracket with two 9/32 inch diameter holes spaced 1-1/2 inch C to C
Plug - U-77/U
Over-all Dimensions
Length - 7-1/32 inches (178. 59 mm)
Width - 5-21/32 inches (143.67 mm)
Depth - 3-5/16 inches (84. 14 mm)
ADDITIONAL PHYSICAL DATA
Case Material - Metal
TECHNICAL DESCRIPTION
INPUT
Voice coil impedance - 8 ohms
Power handling rating - 2 watts (warble tones)
Frequency range - 300 to 7,000 cps
Transformer Data - 600 ohms primary impedance
Environmental Data
Operating Conditions:
Temperature - From -65 deg F to + 160 deg F
Elevation - 5,000 feet above sea level
Relative Humidity - 95 percent
Non-operating Conditions:
Temperature - From -80 deg F to + 160 deg F for 72 hours
Elevation - 50, 000 feet above sea level
Relative Humidity - 100 percent


Schematic

LS-166 schematic2.jpg


Related Files

Adobe PDF icon.png TM 11-5965-222-14P

OPERATOR'S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS
SPECIAL TOOLS LISTS (INCLUDING DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS)
DYNAMIC LOUDSPEAKER
LS-166/U
31 July 1973


MIL-L-12632
MSS 5965-6