Difference between revisions of "AN~ARC-1"
Jump to navigation
Jump to search
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | Airborne radio communications no. 1. VHF | + | Airborne radio communications no. 1. and 1A, VHF |
| + | * Radio Set AN/ARC-1A is a general purpose low power VHF, AM (voice) transceiver for radiotelephone communications between aircraft, and from aircraft to ground stations. Remote selection of any one of ten preset crystal-controlled channels is possible. the receiver permits monitoring on the guard channel while operating on a main communications channel. | ||
| + | |||
| + | The equipment is designed to use a quarter wave base fed rod or mast type antenna, which should be installed as nearly as possible along the centerline of the plane. | ||
| + | |||
| + | |||
| + | [[File:AN_ARC-1A.png|400px|center]] | ||
==Components== | ==Components== | ||
* [[RT-18]] | * [[RT-18]] | ||
| − | * [[MT- | + | * [[MT-230]] or [[MT-239]] |
* [[DY-9]] or [[DY-98]] | * [[DY-9]] or [[DY-98]] | ||
* [[C-45]] | * [[C-45]] | ||
Latest revision as of 20:14, 18 January 2016
Airborne radio communications no. 1. and 1A, VHF
- Radio Set AN/ARC-1A is a general purpose low power VHF, AM (voice) transceiver for radiotelephone communications between aircraft, and from aircraft to ground stations. Remote selection of any one of ten preset crystal-controlled channels is possible. the receiver permits monitoring on the guard channel while operating on a main communications channel.
The equipment is designed to use a quarter wave base fed rod or mast type antenna, which should be installed as nearly as possible along the centerline of the plane.
Components
References
- AN 16-30