Difference between revisions of "TA-1042A~U"

From RadioNerds
Jump to navigation Jump to search
 
(23 intermediate revisions by 2 users not shown)
Line 1: Line 1:
−
[[File:TA-1042A-Top.jpg|400px]]
+
==Overview==
 +
[[File:TA-1042A-Top.jpg|thumb|alt=TA-1042A/U DNVT|TA-1042A/U DNVT]]The digital nonsecure voice terminal ([[DNVT|Digital Nonsecure Voice Terminal]]) is a ruggedized field telephone. It is operable as a tabletop device in tents, shelters, and office environments. It also may be operated outdoors while strapped to a tree or pole. The [[DNVT|Digital Nonsecure Voice Terminal]] is designed for durability to exposure of the elements during operation and transportation. Voice communication is accomplished through the handset. Digital data from an external device interfaces through the TA-1042A/U’s digital data port (DDP). The [[DNVT|Digital Nonsecure Voice Terminal]] transmits and receives full duplex, conditioned diphase digital voice and loop signaling information at 16 or 32 kb/s rates. The [[DNVT|Digital Nonsecure Voice Terminal]] is a nonsecure telephone with no encryption capability. It digitizes voice information using continuously variable slope delta (CVSD) modulation. Digital communication transmissions, both to and from the [[DNVT|Digital Nonsecure Voice Terminal]], are accomplished using a conditioned diphase (CDP) data transmission method. This is accomplished by using the DDP. The [[DNVT|Digital Nonsecure Voice Terminal]] operates in both common battery mode and local battery point-to-point mode, but not simultaneously.
 +
 
 +
 
 +
 
 +
==Hookup Diagram==
 +
[[File:ta-1042-U_hookup.png|650px]]
  
−
==Description==
 
−
The digital nonsecure voice terminal ([[DNVT|Digital Nonsecure Voice Terminal]]) is a ruggedized field telephone. It is operable as a tabletop device in tents, shelters, and office environments. It also may be operated outdoors while strapped to a tree or pole. The [[DNVT|Digital Nonsecure Voice Terminal]] is designed for durability to exposure of the elements during operation and transportation. Voice communication is accomplished through the handset. Digital data from an external device interfaces through the TA-1042A/U’s digital data port (DDP). The [[DNVT|Digital Nonsecure Voice Terminal]] transmits and receives full duplex, conditioned diphase digital voice and loop signaling information at 16 or 32 kb/s rates. The [[DNVT|Digital Nonsecure Voice Terminal]] is a nonsecure telephone with no encryption capability. It digitizes voice information using continuously variable slope delta (CVSD) modulation. Digital communication transmissions, both to and from the [[DNVT|Digital Nonsecure Voice Terminal]], are accomplished using a conditioned diphase (CDP) data transmission method. This is accomplished by using the DDP. The [[DNVT|Digital Nonsecure Voice Terminal]] operates in both common battery mode and local battery point-to-point mode, but not simultaneously.
 
  
  
Line 24: Line 28:
  
  
 +
<!--
 +
==Rear Connection Pinout==
 +
:'''1''' - Signal Ground
 +
:'''2''' - Transmit Audio Shield
 +
:'''3''' - Spare
 +
:'''4''' - Extension Ring Output
 +
:'''5''' - Spare
 +
:'''6''' - Transmit Audio Return
 +
:'''7''' - Transmit Audio Input
 +
:'''8''' - TA-1035 Indicator (Signal is 0 volt output from DNVT)
 +
:'''9''' - Resync Command Input
 +
:'''10''' - Ext R1 Input  (dialed digit control line)
 +
:'''11''' - Ext Off Hook Input
 +
:'''12''' - Reserved
 +
:'''13''' - Dial Output  (indicates DVNT dial state)
 +
:'''14''' - Reserved
 +
:'''15''' - Voice / Data (selects voice or data mode of DNVT)
 +
:'''16''' - Transmit Clock Output
 +
:'''17''' - Ext R2 Input  (dialed digit control line)
 +
:'''18''' - Ring / Busy Indicator Output
 +
:'''19''' - Reserved
 +
:'''20''' - Reserved
 +
:'''21''' - Data Device / Extension Network Power (this is a control line and is not to be used to derive power from the DNVT)
 +
:'''22''' - Spare
 +
:'''23''' - Data Device Off - Hook Input
 +
:'''24''' - Transmit Data Input
 +
:'''25''' - Read Dialed Digit Input
 +
:'''26''' - Reserved
 +
:'''27''' - Extension Push-to-talk input
 +
:'''28''' - Reserved
 +
:'''29''' - Transmit Ready Output
 +
:'''30''' - Reserved
 +
:'''31''' - Ring Data Output
 +
:'''32''' - Ext C1 Input  (dialed digit control line)
 +
:'''33''' - Reserved
 +
:'''34''' - Spare
 +
:'''35''' - Extension Network Connection Signal Input
 +
:'''36''' - Data Device Connection Signal Input
 +
:'''37''' - Loop Back Input
 +
:'''38''' - Rate Change Flag Output
 +
:'''39''' - Receive Data Output
 +
:'''40''' - Ext C2 Input (dialed digit control line)
 +
:'''41''' - Reserved
 +
:'''42''' - Spare
 +
:'''43''' - Reserved
 +
:'''44''' - Spare
 +
:'''45''' - Half Duplex Flag Output
 +
:'''46''' - Receive Clock Output
 +
:'''47''' - Local Off Hook Output
 +
:'''48''' - TA-1042 Indicator Output (Signal is +6v, +0.8v/-0.5v, output from the DVNT)
 +
:'''49''' - Receive Audio Return
 +
:'''50''' - Receive Audio Output
 +
:'''51''' - Codewords Output (dial digit codewords from the DVNT to TCS)
 +
:'''52''' - Go On Hook Output
 +
:'''53''' - Frame Ground
 +
:'''54''' - Receive Audio Shield
 +
:'''55''' - Busy Tone Output (set when DNVT detects busy or error signals from the TCS)
 +
-->
  
 
==Images==
 
==Images==
 
<gallery widtht=100px heights=100px perrow=4>
 
<gallery widtht=100px heights=100px perrow=4>
−
File:TA-1042A-Bottom.jpg|Bottom of TA-1042A/U
+
File:TA-1042A-Bottom.jpg|Bottom of TA-1042A/U (NF6X)
−
File:TA-1042A-Rear.jpg|Rear of TA-1042A/U
+
File:TA-1042A-Rear.jpg|Rear of TA-1042A/U (NF6X)
−
File:TA-1042A-PCB.jpg|TA-1042A/U Main PCB
+
File:TA-1042A-PCB.jpg|TA-1042A/U Main PCB (NF6X)
 +
File:TA-1042-1.jpg|Top View, Handset On-Hook (NF6X)
 +
File:TA-1042-2.jpg|Top View, Handset Off-Hook (NF6X)
 +
File:TA-1042-4.jpg|Dataplate (NF6X)
 +
File:TA-1042-5.jpg|Warranty Decal (NF6X)
 +
File:TA-1042-6.jpg|Decal on Bottom (NF6X)
 +
File:TA-1042-7.jpg|Data Accessory Connector, Phone is upside Down (NF6X)
 +
File:TA-1042-9.jpg|Right Side View (NF6X)
 +
File:TA-1042-10.jpg|Handset Markings (NF6X)
 +
File:TA-1042-12.jpg|Screw Under Warranty Decal (NF6X)
 +
File:TA-1042-13.jpg|Case Opened (NF6X)
 +
File:TA-1042-15.jpg|Wire Line Input Protection and Filtering (NF6X)
 +
File:TA-1042-16.jpg|Keypad
 +
File:TA-1042-17.jpg|Audio Connection
 
</gallery>
 
</gallery>
  
Line 37: Line 112:
 
::TA-1042A/U (NSN 5805-01-318-8412)  
 
::TA-1042A/U (NSN 5805-01-318-8412)  
 
::(EIC: N/A),  
 
::(EIC: N/A),  
−
::05/15/1992 (presently under restricted distribution)
+
::05/15/1992 (presently under restricted distribution level "B")
 +
 
 +
 
  
 +
;{{pdf|TM_11-5805-780-12P.pdf|TM 11-5805-780-12P}}
 +
:Operation and Maintenance Instructions
 +
:with Illustrated Parts Breakdown
 +
::Digital Non-Secure Voice Terminal With Digital Data Port
 +
::TA-1042A/U
 +
::Part Number 5285000-001
 +
::NSN 5805-01-318-8421
 +
::30 June 1991
  
 
[[Category:Military/Field Phones]]
 
[[Category:Military/Field Phones]]
 +
{{DISPLAYTITLE: TA-1042(A)/U}}

Latest revision as of 20:47, 13 May 2016

Overview

TA-1042A/U DNVT
TA-1042A/U DNVT

The digital nonsecure voice terminal (Digital Nonsecure Voice Terminal) is a ruggedized field telephone. It is operable as a tabletop device in tents, shelters, and office environments. It also may be operated outdoors while strapped to a tree or pole. The Digital Nonsecure Voice Terminal is designed for durability to exposure of the elements during operation and transportation. Voice communication is accomplished through the handset. Digital data from an external device interfaces through the TA-1042A/U’s digital data port (DDP). The Digital Nonsecure Voice Terminal transmits and receives full duplex, conditioned diphase digital voice and loop signaling information at 16 or 32 kb/s rates. The Digital Nonsecure Voice Terminal is a nonsecure telephone with no encryption capability. It digitizes voice information using continuously variable slope delta (CVSD) modulation. Digital communication transmissions, both to and from the Digital Nonsecure Voice Terminal, are accomplished using a conditioned diphase (CDP) data transmission method. This is accomplished by using the DDP. The Digital Nonsecure Voice Terminal operates in both common battery mode and local battery point-to-point mode, but not simultaneously.


Hookup Diagram

Ta-1042-U hookup.png


Technical Characteristics

Overall Dimensions
Width
7 in
Height
4.25 in
Length
9.75in
Weight
4.5lb (approx)
Temperature Range
Normal Operating
-30C (-22F) to +52C (+125F)
Storage
-57 C (-70 F) to +71C (+160F)
Humidity Range
Up to 98%


Images

  • Bottom of TA-1042A/U (NF6X)

  • Rear of TA-1042A/U (NF6X)

  • TA-1042A/U Main PCB (NF6X)

  • Top View, Handset On-Hook (NF6X)

  • Top View, Handset Off-Hook (NF6X)

  • Dataplate (NF6X)

  • Warranty Decal (NF6X)

  • Decal on Bottom (NF6X)

  • Data Accessory Connector, Phone is upside Down (NF6X)

  • Right Side View (NF6X)

  • Handset Markings (NF6X)

  • Screw Under Warranty Decal (NF6X)

  • Case Opened (NF6X)

  • Wire Line Input Protection and Filtering (NF6X)

  • Keypad

  • Audio Connection

Related Files

TB 11-5805-780-15
WARRANTY PROGRAM FOR DIGITAL NON-SECURE VOICE TERMINAL WITH DIGITAL DATA PORT
TA-1042A/U (NSN 5805-01-318-8412)
(EIC: N/A),
05/15/1992 (presently under restricted distribution level "B")


Adobe PDF icon.png TM 11-5805-780-12P

Operation and Maintenance Instructions
with Illustrated Parts Breakdown
Digital Non-Secure Voice Terminal With Digital Data Port
TA-1042A/U
Part Number 5285000-001
NSN 5805-01-318-8421
30 June 1991
Retrieved from "http://www.radionerds.com/index.php?title=TA-1042A~U&oldid=20885"