Difference between revisions of "C-2296~VRC"
Jump to navigation
Jump to search
RadioNerds (talk | contribs) |
RadioNerds (talk | contribs) |
||
| Line 1: | Line 1: | ||
===Overview=== | ===Overview=== | ||
| − | + | The C-2296/VRC is installed in a waterproof box, outside the vehicle (usually tanks). It comes with an [[H-207~VRC|H-207/VRC]] attached. The C-2296/VRC must be connected to a [[C-2297~VRC|C-2297/VRC]] (through vehicle wiring). | |
| − | the | + | |
| + | [[File:C-2296_VRC.png|400px]] | ||
| + | |||
| + | |||
| + | * '''J61''' - Provides connection, in parallel, to the driver’ s C-2297/VRC through vehicle wiring. | ||
| + | * '''J62''' - Provides connection to the external signal lamp, attached to the waterproof box. | ||
| + | * '''RAD TRANS-INT''' - Functions only if C-2297/VRC has EXT selected. In the INT position the operator will monitor the audio selected by the driver’s C-2297/VRC, and may key the intercom. In the spring loaded RAD TRANS position, the operator may key the radio (selected by the driver). | ||
| + | * '''VOLUME''' - Adjusts the loudness of the audio signal heard at the H-207/VRC. | ||
| + | * '''Key switch''' - The key switch on the H-207/VRC is used to key the radio or intercom set. It is also used to flash the light on the driver’s C-2297/VRC, if he has selected OFF on the SIG-E XT-OFF switch, by pressing and releasing the switch. | ||
[[Category:Military/Intercoms]] | [[Category:Military/Intercoms]] | ||
{{DISPLAYTITLE:C-2296/VRC}} | {{DISPLAYTITLE:C-2296/VRC}} | ||
Latest revision as of 05:55, 29 November 2013
Overview
The C-2296/VRC is installed in a waterproof box, outside the vehicle (usually tanks). It comes with an H-207/VRC attached. The C-2296/VRC must be connected to a C-2297/VRC (through vehicle wiring).
- J61 - Provides connection, in parallel, to the driver’ s C-2297/VRC through vehicle wiring.
- J62 - Provides connection to the external signal lamp, attached to the waterproof box.
- RAD TRANS-INT - Functions only if C-2297/VRC has EXT selected. In the INT position the operator will monitor the audio selected by the driver’s C-2297/VRC, and may key the intercom. In the spring loaded RAD TRANS position, the operator may key the radio (selected by the driver).
- VOLUME - Adjusts the loudness of the audio signal heard at the H-207/VRC.
- Key switch - The key switch on the H-207/VRC is used to key the radio or intercom set. It is also used to flash the light on the driver’s C-2297/VRC, if he has selected OFF on the SIG-E XT-OFF switch, by pressing and releasing the switch.