Difference between revisions of "LS-518"

From RadioNerds
Jump to navigation Jump to search
(Created page with " ===Reference Files=== ;{{pdf|TM 11-5830-258-14.PDF|TM 11-5830-258-14}} :OPERATOR'S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL :INTERCOMMUNICATI...")
 
 
(6 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
==Overview==
 +
The LS-518A/SIC is identical to the LS- 519A/SIC in every respect except for the quantity of station selector switches. The LS-518A/SIC has one 10 pushbutton selector switch assembly and is capable of operating in conjunction with up to 10 other communication stations in any combination regardless of type. The LS-519A/SIC has two 10 pushbutton switch assemblies and is capable of operating in con-junction with up to 20 other intercommunication stations in any combination regardless of type.
  
 +
The LS-518A/SIC or the LS-519A/SIC, hereafter referred to as the 'master station, provides two-way voice communications by way of input/output audio devices which may be either microphones, handsets, or loudspeakers. The loudspeaker contained in the master station, which may be used for talk/listen, is the Type LS-445/U. A receptacle is provided on the front panel which will accept either the type M-132/SIC microphone or the type H-351A/SIC headset. In addition to the station selector switches, MIC OR HEADSET connector, and the loudspeaker, the master station front panel contains a release (REL) lamp, CALL lamp, BUSY lamp, a HANDSFREE-NORMALPRESS TO TALK switch, a DIMMER control switch, and a VOLUME control switch for incoming loudspeaker audio.
  
  
===Reference Files===
+
===LS-518===
 +
[[File:LS-518.png|400px]]
 +
[[File:LS-518-1.png|400px]]
 +
 
 +
 
 +
===LS-519===
 +
[[File:LS-519.png|400px]]
 +
[[File:LS-519-1.png|400px]]
 +
 
 +
 
 +
===Test Fixture===
 +
[[File:LS-518_Test_Fixture.png|400px]]
 +
 
 +
 
 +
==Technical Details==
 +
;Power Requirements
 +
:Single phase, 24.8 watts @ 0.9p.f. 115 ±6 volts ac @ 60 ± 3Hz., 0.24 amperes nominal.
 +
;Heat Dissipation
 +
:75 BTU/HR @ full rated output.
 +
;Ambient Operating Temperature
 +
:0°C to 650C.
 +
;Relative Humidity
 +
:95% maximum.
 +
;Output
 +
:3 watts @ 5% maximum THD (70 volts rms into 1667 ohms).
 +
;Input Sensitivity
 +
:8.7mv into 150 ohm for mic or handset. 4mv into 16 ohm for speaker input.
 +
;Amplifier Gain
 +
:78dB voltage gain @ 1,000z. (mic input).
 +
;Amplifier Frequency Response
 +
:400 to 5,000Hz ±2dB.
 +
;Rated Loudspeaker Output; (1,000 Hz)
 +
:99dB SPL (Ref. 0.0002 dynes/cm2) @ 2 ft. from front panel.
 +
;Rated Loudspeaker Input, when used as a microphone (1,000 Hz)
 +
:86dB SPL (Ref. 0.0002 dynes/cm2) @ plane of front panel.
 +
 
 +
 
 +
==Reference Files==
 
;{{pdf|TM 11-5830-258-14.PDF|TM 11-5830-258-14}}
 
;{{pdf|TM 11-5830-258-14.PDF|TM 11-5830-258-14}}
 
:OPERATOR'S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL
 
:OPERATOR'S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

Latest revision as of 22:26, 9 December 2013

Overview

The LS-518A/SIC is identical to the LS- 519A/SIC in every respect except for the quantity of station selector switches. The LS-518A/SIC has one 10 pushbutton selector switch assembly and is capable of operating in conjunction with up to 10 other communication stations in any combination regardless of type. The LS-519A/SIC has two 10 pushbutton switch assemblies and is capable of operating in con-junction with up to 20 other intercommunication stations in any combination regardless of type.

The LS-518A/SIC or the LS-519A/SIC, hereafter referred to as the 'master station, provides two-way voice communications by way of input/output audio devices which may be either microphones, handsets, or loudspeakers. The loudspeaker contained in the master station, which may be used for talk/listen, is the Type LS-445/U. A receptacle is provided on the front panel which will accept either the type M-132/SIC microphone or the type H-351A/SIC headset. In addition to the station selector switches, MIC OR HEADSET connector, and the loudspeaker, the master station front panel contains a release (REL) lamp, CALL lamp, BUSY lamp, a HANDSFREE-NORMALPRESS TO TALK switch, a DIMMER control switch, and a VOLUME control switch for incoming loudspeaker audio.


LS-518

LS-518.png LS-518-1.png


LS-519

LS-519.png LS-519-1.png


Test Fixture

LS-518 Test Fixture.png


Technical Details

Power Requirements
Single phase, 24.8 watts @ 0.9p.f. 115 ±6 volts ac @ 60 ± 3Hz., 0.24 amperes nominal.
Heat Dissipation
75 BTU/HR @ full rated output.
Ambient Operating Temperature
0°C to 650C.
Relative Humidity
95% maximum.
Output
3 watts @ 5% maximum THD (70 volts rms into 1667 ohms).
Input Sensitivity
8.7mv into 150 ohm for mic or handset. 4mv into 16 ohm for speaker input.
Amplifier Gain
78dB voltage gain @ 1,000z. (mic input).
Amplifier Frequency Response
400 to 5,000Hz ±2dB.
Rated Loudspeaker Output; (1,000 Hz)
99dB SPL (Ref. 0.0002 dynes/cm2) @ 2 ft. from front panel.
Rated Loudspeaker Input, when used as a microphone (1,000 Hz)
86dB SPL (Ref. 0.0002 dynes/cm2) @ plane of front panel.


Reference Files

Adobe PDF icon.png TM 11-5830-258-14

OPERATOR'S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL
INTERCOMMUNICATION STATIONS
LS-518A/SIC (NSN 5830-01-018-1202)
LS-519A/SIC (NSN 5830-01-020-6280)
TEST SET, INTERCOMMUNICATION
TS-3990/SIC (NSN 6625-01-126-4886)
28 JUNE 1983