Difference between revisions of "LS-166"
Jump to navigation
Jump to search
RadioNerds (talk | contribs) |
|||
| (8 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
| − | The LS-166/U is used with the older style military radio sets which have a U-79/U audio connector. This is a standard magnetic speaker at 8 ohms at 3 watts. The speaker inclosure includes a 8:600 Ohm transformer to match the radio to the speaker. It has a switch located on the side to switch it between vehicle use and manpack. The connecting cord is terminated with the older style U-77/U connector. | + | [[File:LS-166_bw-1.png|400px|right]]The LS-166/U is used with the older style military radio sets which have a U-79/U audio connector. This is a standard magnetic speaker at 8 ohms at 3 watts. The speaker inclosure includes a 8:600 Ohm transformer to match the radio to the speaker. It has a switch located on the side to switch it between vehicle use and manpack. The connecting cord is terminated with the older style U-77/U connector. |
You often find these speakers with the newer U-229 connector. It was quite common to cut off the old connector and replace it with a new one. Fundamentally though this speaker was not used with the new gear using the U-229 from the factory. | You often find these speakers with the newer U-229 connector. It was quite common to cut off the old connector and replace it with a new one. Fundamentally though this speaker was not used with the new gear using the U-229 from the factory. | ||
| − | + | ==Images== | |
| − | |||
| − | |||
| − | |||
| − | |||
<gallery widths=100px heights=100px perrow=5> | <gallery widths=100px heights=100px perrow=5> | ||
| + | File:LS-166_front.JPG | ||
File:LS-166_back.JPG | File:LS-166_back.JPG | ||
File:LS-166_Inside.JPG | File:LS-166_Inside.JPG | ||
| Line 15: | Line 12: | ||
File:LS-166_schematic.JPG | File:LS-166_schematic.JPG | ||
File:LS-166_top.JPG | File:LS-166_top.JPG | ||
| + | File:LS-166_bw.png | ||
</gallery> | </gallery> | ||
| + | |||
| + | |||
| + | ==Specifications== | ||
| + | ;PHYSICAL DESCRIPTION: | ||
| + | :Cone Diameter - 4 inches (101.60 mm) | ||
| + | :Mounting Dimensions - Adjustable mounting bracket with two 9/32 inch diameter holes spaced 1-1/2 inch C to C | ||
| + | :Plug - U-77/U | ||
| + | ;Over-all Dimensions: | ||
| + | :Length - 7-1/32 inches (178. 59 mm) | ||
| + | :Width - 5-21/32 inches (143.67 mm) | ||
| + | :Depth - 3-5/16 inches (84. 14 mm) | ||
| + | ;ADDITIONAL PHYSICAL DATA: | ||
| + | :Case Material - Metal | ||
| + | ;TECHNICAL DESCRIPTION: | ||
| + | :INPUT | ||
| + | ::Voice coil impedance - 8 ohms | ||
| + | ::Power handling rating - 2 watts (warble tones) | ||
| + | ::Frequency range - 300 to 7,000 cps | ||
| + | :Transformer Data - 600 ohms primary impedance | ||
| + | ;Environmental Data: | ||
| + | :Operating Conditions: | ||
| + | ::Temperature - From -65 deg F to + 160 deg F | ||
| + | ::Elevation - 5,000 feet above sea level | ||
| + | ::Relative Humidity - 95 percent | ||
| + | :Non-operating Conditions: | ||
| + | ::Temperature - From -80 deg F to + 160 deg F for 72 hours | ||
| + | ::Elevation - 50, 000 feet above sea level | ||
| + | ::Relative Humidity - 100 percent | ||
| Line 21: | Line 47: | ||
[[File:LS-166_schematic2.jpg]] | [[File:LS-166_schematic2.jpg]] | ||
| + | |||
| + | ==Related Files== | ||
| + | ;{{pdf|TM_11-5965-222-14P.pdf|TM 11-5965-222-14P}} | ||
| + | :OPERATOR'S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS | ||
| + | :SPECIAL TOOLS LISTS (INCLUDING DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS) | ||
| + | ::DYNAMIC LOUDSPEAKER | ||
| + | ::LS-166/U | ||
| + | ::31 July 1973 | ||
| + | |||
| + | |||
| + | :MIL-L-12632 | ||
| + | :MSS 5965-6 | ||
[[Category:Military/Speakers]] | [[Category:Military/Speakers]] | ||
| + | {{DISPLAYTITLE:LS-166/U}} | ||
Latest revision as of 00:19, 11 September 2017
The LS-166/U is used with the older style military radio sets which have a U-79/U audio connector. This is a standard magnetic speaker at 8 ohms at 3 watts. The speaker inclosure includes a 8:600 Ohm transformer to match the radio to the speaker. It has a switch located on the side to switch it between vehicle use and manpack. The connecting cord is terminated with the older style U-77/U connector.
You often find these speakers with the newer U-229 connector. It was quite common to cut off the old connector and replace it with a new one. Fundamentally though this speaker was not used with the new gear using the U-229 from the factory.
Images
Specifications
- PHYSICAL DESCRIPTION
- Cone Diameter - 4 inches (101.60 mm)
- Mounting Dimensions - Adjustable mounting bracket with two 9/32 inch diameter holes spaced 1-1/2 inch C to C
- Plug - U-77/U
- Over-all Dimensions
- Length - 7-1/32 inches (178. 59 mm)
- Width - 5-21/32 inches (143.67 mm)
- Depth - 3-5/16 inches (84. 14 mm)
- ADDITIONAL PHYSICAL DATA
- Case Material - Metal
- TECHNICAL DESCRIPTION
- INPUT
- Voice coil impedance - 8 ohms
- Power handling rating - 2 watts (warble tones)
- Frequency range - 300 to 7,000 cps
- Transformer Data - 600 ohms primary impedance
- Environmental Data
- Operating Conditions:
- Temperature - From -65 deg F to + 160 deg F
- Elevation - 5,000 feet above sea level
- Relative Humidity - 95 percent
- Non-operating Conditions:
- Temperature - From -80 deg F to + 160 deg F for 72 hours
- Elevation - 50, 000 feet above sea level
- Relative Humidity - 100 percent
Schematic
Related Files
- OPERATOR'S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS
- SPECIAL TOOLS LISTS (INCLUDING DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS)
- DYNAMIC LOUDSPEAKER
- LS-166/U
- 31 July 1973
- MIL-L-12632
- MSS 5965-6