Difference between revisions of "LS-166"

From RadioNerds
Jump to navigation Jump to search
m (BinD moved page LS-166~U to LS-166: list)
 
(3 intermediate revisions by one other user not shown)
Line 1: Line 1:
[[File:LS-166_bw.png|right]]The LS-166/U is used with the older style military radio sets which have a U-79/U audio connector.  This is a standard magnetic speaker at 8 ohms at 3 watts.  The speaker inclosure includes a 8:600 Ohm transformer to match the radio to the speaker.  It has a switch located on the side to switch it between vehicle use and manpack. The connecting cord is terminated with the older style U-77/U connector.
+
[[File:LS-166_bw-1.png|400px|right]]The LS-166/U is used with the older style military radio sets which have a U-79/U audio connector.  This is a standard magnetic speaker at 8 ohms at 3 watts.  The speaker inclosure includes a 8:600 Ohm transformer to match the radio to the speaker.  It has a switch located on the side to switch it between vehicle use and manpack. The connecting cord is terminated with the older style U-77/U connector.
  
 
You often find these speakers with the newer U-229 connector.  It was quite common to cut off the old connector and replace it with a new one.  Fundamentally though this speaker was not used with the new gear using the U-229 from the factory.
 
You often find these speakers with the newer U-229 connector.  It was quite common to cut off the old connector and replace it with a new one.  Fundamentally though this speaker was not used with the new gear using the U-229 from the factory.
Line 12: Line 12:
 
File:LS-166_schematic.JPG
 
File:LS-166_schematic.JPG
 
File:LS-166_top.JPG
 
File:LS-166_top.JPG
 +
File:LS-166_bw.png
 
</gallery>
 
</gallery>
 +
 +
 +
==Specifications==
 +
;PHYSICAL DESCRIPTION:
 +
:Cone Diameter - 4 inches (101.60 mm)
 +
:Mounting Dimensions - Adjustable mounting bracket with two 9/32 inch diameter holes spaced 1-1/2 inch C to C
 +
:Plug - U-77/U
 +
;Over-all Dimensions:
 +
:Length - 7-1/32 inches (178. 59 mm)
 +
:Width - 5-21/32 inches (143.67 mm)
 +
:Depth - 3-5/16 inches (84. 14 mm)
 +
;ADDITIONAL PHYSICAL DATA:
 +
:Case Material - Metal
 +
;TECHNICAL DESCRIPTION:
 +
:INPUT
 +
::Voice coil impedance - 8 ohms
 +
::Power handling rating - 2 watts (warble tones)
 +
::Frequency range - 300 to 7,000 cps
 +
:Transformer Data - 600 ohms primary impedance
 +
;Environmental Data:
 +
:Operating Conditions:
 +
::Temperature - From -65 deg F to + 160 deg F
 +
::Elevation - 5,000 feet above sea level
 +
::Relative Humidity - 95 percent
 +
:Non-operating Conditions:
 +
::Temperature - From -80 deg F to + 160 deg F for 72 hours
 +
::Elevation - 50, 000 feet above sea level
 +
::Relative Humidity - 100 percent
  
  
Line 26: Line 55:
 
::LS-166/U
 
::LS-166/U
 
::31 July 1973
 
::31 July 1973
 +
 +
 +
:MIL-L-12632
 +
:MSS 5965-6
  
 
[[Category:Military/Speakers]]
 
[[Category:Military/Speakers]]
 
{{DISPLAYTITLE:LS-166/U}}
 
{{DISPLAYTITLE:LS-166/U}}

Latest revision as of 00:19, 11 September 2017

LS-166 bw-1.png

The LS-166/U is used with the older style military radio sets which have a U-79/U audio connector. This is a standard magnetic speaker at 8 ohms at 3 watts. The speaker inclosure includes a 8:600 Ohm transformer to match the radio to the speaker. It has a switch located on the side to switch it between vehicle use and manpack. The connecting cord is terminated with the older style U-77/U connector.

You often find these speakers with the newer U-229 connector. It was quite common to cut off the old connector and replace it with a new one. Fundamentally though this speaker was not used with the new gear using the U-229 from the factory.


Images


Specifications

PHYSICAL DESCRIPTION
Cone Diameter - 4 inches (101.60 mm)
Mounting Dimensions - Adjustable mounting bracket with two 9/32 inch diameter holes spaced 1-1/2 inch C to C
Plug - U-77/U
Over-all Dimensions
Length - 7-1/32 inches (178. 59 mm)
Width - 5-21/32 inches (143.67 mm)
Depth - 3-5/16 inches (84. 14 mm)
ADDITIONAL PHYSICAL DATA
Case Material - Metal
TECHNICAL DESCRIPTION
INPUT
Voice coil impedance - 8 ohms
Power handling rating - 2 watts (warble tones)
Frequency range - 300 to 7,000 cps
Transformer Data - 600 ohms primary impedance
Environmental Data
Operating Conditions:
Temperature - From -65 deg F to + 160 deg F
Elevation - 5,000 feet above sea level
Relative Humidity - 95 percent
Non-operating Conditions:
Temperature - From -80 deg F to + 160 deg F for 72 hours
Elevation - 50, 000 feet above sea level
Relative Humidity - 100 percent


Schematic

LS-166 schematic2.jpg


Related Files

Adobe PDF icon.png TM 11-5965-222-14P

OPERATOR'S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS
SPECIAL TOOLS LISTS (INCLUDING DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS)
DYNAMIC LOUDSPEAKER
LS-166/U
31 July 1973


MIL-L-12632
MSS 5965-6