Difference between revisions of "TL - Tools"
Jump to navigation
Jump to search
| (61 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | Tools | + | Tools (Note (NIC) = not in 1920 catalogue) |
| − | * [[TL-1]] screwdriver | + | * [[TL-1]] screwdriver, 3 1/2-inch |
| − | * [[TL-2]] screwdriver | + | * [[TL-2]] screwdriver 4-inch |
| − | * [[TL-3]] | + | * [[TL-3]] (NIC) Stone, Carborundum, medium India, No. 53 |
| − | * [[TL-4]] screwdriver | + | * [[TL-4]] screwdriver 5-inch |
* [[TL-5]] file | * [[TL-5]] file | ||
| − | * [[TL-6]] wrench | + | * [[TL-6]] wrench, double open end, 3-inch, 0.193-inch, 0.385-inch |
* [[TL-7]] gauge | * [[TL-7]] gauge | ||
| − | * [[TL-8]] | + | * [[TL-8]], wrench 4-inch |
| − | * [[TL-9]] | + | * [[TL-9]] file, 4-inch warding |
| − | * [[TL-10]] | + | * [[TL-10]] File (6Q37110) flat bastard, 6-inch |
* [[TL-11]] ? | * [[TL-11]] ? | ||
| − | * [[TL-12]] | + | * [[TL-12]], plyers, round nose, side cutting, 6-inch |
* [[TL-13]] ? (not in 1920 cat.) small lineman's pliers | * [[TL-13]] ? (not in 1920 cat.) small lineman's pliers | ||
| − | * [[TL-14]] handle | + | * [[TL-14]] handle, file |
* [[TL-15]] ? | * [[TL-15]] ? | ||
* [[TL-16]] ? | * [[TL-16]] ? | ||
| − | * [[TL-17]] | + | * [[TL-17]] wrench 9-inch |
* [[TL-18]] puller | * [[TL-18]] puller | ||
| − | * [[TL-19]] pliers | + | * [[TL-19]] pliers, combination 6-inch |
| − | * [[TL-20]] pliers | + | * [[TL-20]] pliers, combination 8-inch |
| − | * [[TL-21]] screwdriver | + | * [[TL-21]] screwdriver 6 1/2-inch |
| − | * [[TL-22]] | + | * [[TL-22]] (NIC) Screwdriver, 4-inch flat tip, 6R15120. |
| − | * [[TL-23]] | + | * [[TL-23]] (NIC) screwdriver, 7-inch |
| − | * [[TL-24]] pliers | + | * [[TL-24]] pliers, side cutting, 4-inch |
| − | * [[TL-25]] screwdriver | + | * [[TL-25]] screwdriver, jewelers |
| − | * [[TL-26]] tape | + | * [[TL-26]] tape, 1/4-inch, cotton, for cable splicing. 1.000 yards |
* [[TL-27]] screwdriver | * [[TL-27]] screwdriver | ||
* [[TL-28]] screwdriver | * [[TL-28]] screwdriver | ||
* [[TL-29]] knife | * [[TL-29]] knife | ||
| − | * [[TL-30]] file | + | * [[TL-30]] file like TL-5 but with bent handle |
| − | * [[TL-31]] | + | * [[TL-31]], square, combination bevel and level |
| − | * [[TL-32]] | + | * [[TL-32]], calipers, outside, |
* [[TL-33]] | * [[TL-33]] | ||
* [[TL-34]] | * [[TL-34]] | ||
| − | * [[TL-35]] | + | * [[TL-35]], speed indicator |
* [[TL-36]] | * [[TL-36]] | ||
* [[TL-37]] | * [[TL-37]] | ||
| − | * [[TL-38]] | + | * [[TL-38]], hammer, ball peen, 12-Oz. |
| − | * [[TL-39]] | + | * [[TL-39]], (NIC) hammer, claw, 1-Lb. |
| − | * [[TL-40]] | + | * [[TL-40]], screw driver, 8 1/2-inch |
* [[TL-41]] | * [[TL-41]] | ||
* [[TL-42]] | * [[TL-42]] | ||
* [[TL-43]] | * [[TL-43]] | ||
| − | * [[TL-44]] | + | * [[TL-44]], Screwdriver 13 1/2-inchP/O [[TE-36]] |
| − | * [[TL-45]] | + | * [[TL-45]], soldering iron, 1.5 Lb. |
| − | * [[TL-46]] | + | * [[TL-46]] (NIC) soldering iron jewlers |
| − | * [[TL-47]] | + | * [[TL-47]], chisels, cold 1/2-inch |
| − | * [[TL-48]] | + | * [[TL-48]], chisels, cold 3/4-inch |
| − | * [[TL-49]] | + | * [[TL-49]], center punch, 4-inch |
* [[TL-50]] | * [[TL-50]] | ||
| − | * [[TL-51]] | + | * [[TL-51]], wrench, 6-inch |
| − | * [[TL-52]] | + | * [[TL-52]], wrench, 8-inch |
* [[TL-53]] | * [[TL-53]] | ||
| − | * [[TL-54]] | + | * [[TL-54]], wrench, monkey 6-inch |
| − | * [[TL-55]] | + | * [[TL-55]], wrench, stillson, 14-inch |
* [[TL-56]] | * [[TL-56]] | ||
* [[TL-57]] | * [[TL-57]] | ||
* [[TL-58]] | * [[TL-58]] | ||
| − | * [[TL-59]] | + | * [[TL-59]],tap and die set |
| − | * [[TL-60]] | + | * [[TL-60]], pliers diagonal, 6-inch |
* [[TL-61]] | * [[TL-61]] | ||
| − | * [[TL-62]] | + | * [[TL-62]], pliers, diagonal, 3 1/2-inch |
| − | * [[TL-63]] | + | * [[TL-63]], Bits, expansion, 7/8 to 3-inch, |
| − | * [[TL-64]] | + | * [[TL-64]], tinners snips |
* [[TL-65]] | * [[TL-65]] | ||
| − | * [[TL-66]] | + | * [[TL-66]] (NIC) torch |
| − | * [[TL-67]] | + | * [[TL-67]], hand drill 3/8-inch |
| − | * [[TL-68]] | + | * [[TL-68]], tool roll 10 assorted files |
| − | * [[TL-69]] | + | * [[TL-69]], tool roll, open end wrench's |
| − | * [[TL-70]] | + | * [[TL-70]], tool roll, assorted drills and reamers |
| − | * [[TL-71]] | + | * [[TL-71]], test clips |
| − | * [[TL-72]] | + | * [[TL-72]] (NIC) brush camels-hair, flat |
| − | * [[TL-73]] | + | * [[TL-73]], Lathes, metal working, 30-inch bed. |
* [[TL-74]] | * [[TL-74]] | ||
* [[TL-75]] | * [[TL-75]] | ||
| Line 81: | Line 81: | ||
* [[TL-79]] | * [[TL-79]] | ||
* [[TL-80]] | * [[TL-80]] | ||
| − | * [[TL-81]] | + | * [[TL-81]], drift pin, |
| − | * [[TL-82]] | + | * [[TL-82]], wrench, alligator 10-inch |
| − | * [[TL-83]] tape | + | * [[TL-83]] tape 3/4-inch friction |
| − | * [[TL-84]] wrench | + | * [[TL-84]] wrench, spanner, for [[BC-47]] nuts |
| − | * [[TL-85]] wrench | + | * [[TL-85]] wrench, double end, |
* [[TL-86]] ? | * [[TL-86]] ? | ||
| − | * [[TL-87]] pliers | + | * [[TL-87]] pliers, pointed nose, 4 3/8-inch |
| − | * [[TL-88]] wrench | + | * [[TL-88]] wrench, double end, |
* [[TL-89]] ? | * [[TL-89]] ? | ||
* [[TL-90]] cable dresser | * [[TL-90]] cable dresser | ||
* [[TL-91]] ? | * [[TL-91]] ? | ||
* [[TL-92]] socket wrench | * [[TL-92]] socket wrench | ||
| − | * [[TL-93]] | + | * [[TL-93]] (NIC) rubber tape |
| − | * [[TL-94]] tape | + | * [[TL-94]] tape, rubber |
| − | * [[TL-95]] flashlight | + | * [[TL-95]] flashlight, fiber case, [[BA-1]], 8 1/4" x 1 1/2 " |
* [[TL-96]] tap and die set | * [[TL-96]] tap and die set | ||
| − | * [[TL-97]] ? | + | * [[TL-97]] ? bandage ? P/O [[TE-56]] |
* [[TL-98]] drift pin | * [[TL-98]] drift pin | ||
* [[TL-99]] drift pin | * [[TL-99]] drift pin | ||
| Line 103: | Line 103: | ||
( NOTE 1920 signal corps catalogue ends here ) | ( NOTE 1920 signal corps catalogue ends here ) | ||
| − | * [[TL-100]] | + | * [[TL-100]], wrench [[RE-12]] |
* [[TL-101]] | * [[TL-101]] | ||
| − | * [[TL-102]] | + | * [[TL-102]] pliers, |
| − | * [[TL-103]] | + | * [[TL-103]] pliers, diagonal cutting 5-inch [[TE-6]], [[TE-36]] |
| − | * [[TL-104]] | + | * [[TL-104]] saw, hand 26-inch |
| − | * [[TL-105]] | + | * [[TL-105]] screwdriver |
| − | * [[TL-106]] | + | * [[TL-106]] screwdriver |
| − | * [[TL-107]] | + | * [[TL-107]] pliers, side cutting, 8-inch |
| − | * [[TL-108]] | + | * [[TL-108]] nut driver, 6-inch, 3/8-inch head |
| − | * [[TL-109]] | + | * [[TL-109]] tape, cotton, 1-inch. |
| − | * [[TL-110]] | + | * [[TL-110]] spring loaded alligator clip |
| − | * [[TL-111]] | + | * [[TL-111]] 6 inch adjustable wrench, Crescent #A-16 |
| − | * [[TL-112]] | + | * [[TL-112]] 10 inch adjustable wrench, Crescent #A-110 |
| − | * [[TL-113]] | + | * [[TL-113]], 4-inch blade, flat tip, with flip out "T" hammer handle, P/O [[SCR-132]] |
* [[TL-114]] | * [[TL-114]] | ||
* [[TL-115]] | * [[TL-115]] | ||
| − | * [[TL-116]] | + | * [[TL-116]] Electrician's Knife, (prototypes only) |
| − | * [[TL-117]] | + | * [[TL-117]] electric soldering iron |
* [[TL-118]] | * [[TL-118]] | ||
| − | * [[TL-119]] | + | * [[TL-119]] pliers, side cutting, 5-inch, P/O [[TE-5]] |
| − | * [[TL-120]] | + | * [[TL-120]] electric soldering iron |
| − | * [[TL-121]] | + | * [[TL-121]] electric soldering iron |
* [[TL-122]] flashlight | * [[TL-122]] flashlight | ||
* [[TL-123]] | * [[TL-123]] | ||
| − | * [[TL-124]] | + | * [[TL-124]] bandage, cable splicing |
| − | * [[TL-125]] | + | * [[TL-125]] pliers, gas, combination screwdriver handle, [[TE-15]], [[TE-44]] |
| − | * [[TL-126]] | + | * [[TL-126]] pliers, long chain nosed, 6-inch, |
| − | * [[TL-127]] | + | * [[TL-127]] gage TL-127 is provided with the generator in order to measure the regulator clearances TM 11-231 |
| − | * [[TL-128]] | + | * [[TL-128]] screwdriver set |
| − | * [[TL-129]] | + | * [[TL-129]] saw, cross-cut, |
| − | * [[TL-130]] | + | * [[TL-130]] torch |
| − | * [[TL-131]] | + | * [[TL-131]] jewelers soldering iron |
| − | * [[TL-132]] | + | * [[TL-132]], Soldering iron P/O [[TE-36]] |
| − | * [[TL-133]] | + | * [[TL-133]] file 6-inch round |
* [[TL-134]] | * [[TL-134]] | ||
| − | * [[TL-135]] | + | * [[TL-135]] axe |
* [[TL-136]] | * [[TL-136]] | ||
| − | * [[TL-137]] | + | * [[TL-137]] clip electric, [[TS-27]] test set |
| − | * [[TL-138]] | + | * [[TL-138]] Alignment tool |
| − | * [[TL-139]] | + | * [[TL-139]] soldering iron |
* [[TL-140]] | * [[TL-140]] | ||
* [[TL-141]] | * [[TL-141]] | ||
* [[TL-142]] | * [[TL-142]] | ||
| − | * [[TL-143]] | + | * [[TL-143]] sleeve rolling tool |
| − | * [[TL-144]] | + | * [[TL-144]] Gage, linemans climber |
* [[TL-145]] | * [[TL-145]] | ||
* [[TL-146]] | * [[TL-146]] | ||
| Line 153: | Line 153: | ||
* [[TL-148]] | * [[TL-148]] | ||
* [[TL-149]] | * [[TL-149]] | ||
| − | * [[TL-150]] | + | * [[TL-150]] Alignment Tool |
* [[TL-151]] | * [[TL-151]] | ||
* [[TL-152]] | * [[TL-152]] | ||
| Line 165: | Line 165: | ||
* [[TL-160]] | * [[TL-160]] | ||
* [[TL-161]] | * [[TL-161]] | ||
| − | * [[TL-162]] | + | * [[TL-162]], Block, and 25 Ft. 3/8th manilla rope. |
* [[TL-163]] | * [[TL-163]] | ||
* [[TL-164]] | * [[TL-164]] | ||
| Line 192: | Line 192: | ||
* [[TL-187]] | * [[TL-187]] | ||
* [[TL-188]] | * [[TL-188]] | ||
| − | * [[TL-189]] | + | * [[TL-189]], sleeve compressing tool |
* [[TL-190]] | * [[TL-190]] | ||
* [[TL-191]] | * [[TL-191]] | ||
| − | * [[TL-192]] | + | * [[TL-192]] tape 3/4-inch rubber |
* [[TL-193]] | * [[TL-193]] | ||
* [[TL-194]] | * [[TL-194]] | ||
| − | * [[TL-195]] | + | * [[TL-195]] punch and anvil set [[AN~MPM-1]] |
| − | * [[TL-196]] | + | * [[TL-196]] punch and anvil set [[AN~MPM-1]] |
* [[TL-197]] | * [[TL-197]] | ||
* [[TL-198]] | * [[TL-198]] | ||
* [[TL-199]] | * [[TL-199]] | ||
* [[TL-200]] | * [[TL-200]] | ||
| + | * [[TL-201]] tube puller | ||
| + | * [[TL-202]] | ||
| + | * [[TL-203]] | ||
| + | * [[TL-204]] Wrench, special tool, to adjust jack fastener on telephone switchboards, 18-inches long with wooden handles, and swivel head. PO. [[TE-44]]. | ||
| + | * [[TL-205]] | ||
| + | * [[TL-206]] | ||
| + | * [[TL-207]] | ||
| + | * [[TL-208]] | ||
| + | * [[TL-209]] | ||
| + | * [[TL-210]] | ||
| + | * [[TL-211]] | ||
| + | * [[TL-212]] | ||
| + | * [[TL-213]] | ||
| + | * [[TL-214]] flashlight (beacon) for drop bag [[BG-121]] | ||
| + | * [[TL-215]] handle | ||
| + | * [[TL-216]] hammer | ||
| + | * [[TL-217]] sleeve compressing tool | ||
| + | * [[TL-218]] | ||
| + | * [[TL-219]] miniature tube socket tool, P/O [[I-56]] test set | ||
| + | * [[TL-220]] miniature tube pin die, P/O [[I-56]] test set | ||
| + | * [[TL-221]] | ||
| + | * [[TL-222]] | ||
| + | * [[TL-223]] | ||
| + | * [[TL-224]] | ||
| + | * [[TL-225]] | ||
| + | * [[TL-226]] | ||
| + | * [[TL-227]] | ||
| + | * [[TL-228]] | ||
| + | * [[TL-229]] | ||
| + | * [[TL-230]] | ||
| + | * [[TL-231]] | ||
| + | * [[TL-232]] | ||
| + | * [[TL-233]] | ||
| + | * [[TL-234]] | ||
| + | * [[TL-235]] | ||
| + | * [[TL-236]] | ||
| + | * [[TL-237]] | ||
| + | * [[TL-238]] | ||
| + | * [[TL-239]] | ||
| + | * [[TL-240]] | ||
| + | * [[TL-241]] | ||
| + | * [[TL-242]] | ||
| + | * [[TL-243]] | ||
| + | * [[TL-244]] | ||
| + | * [[TL-245]] | ||
| + | * [[TL-246]] | ||
| + | * [[TL-247]] | ||
| + | * [[TL-248]] | ||
| + | * [[TL-249]] | ||
| + | * [[TL-250]] | ||
| + | * [[TL-251]] | ||
| + | * [[TL-252]] | ||
| + | * [[TL-253]] | ||
| + | * [[TL-254]] | ||
| + | * [[TL-255]] | ||
| + | * [[TL-256]] | ||
| + | * [[TL-257]] | ||
| + | * [[TL-258]] | ||
| + | * [[TL-259]] | ||
| + | * [[TL-260]] | ||
| + | * [[TL-261]] | ||
| + | * [[TL-262]] | ||
| + | * [[TL-263]] | ||
| + | * [[TL-264]] | ||
| + | * [[TL-265]] | ||
| + | * [[TL-266]] | ||
| + | * [[TL-267]] | ||
| + | * [[TL-268]] | ||
| + | * [[TL-269]] | ||
| + | * [[TL-270]] | ||
| + | * [[TL-271]] | ||
| + | * [[TL-272]] | ||
| + | * [[TL-273]] | ||
| + | * [[TL-274]] | ||
| + | * [[TL-275]] | ||
| + | * [[TL-276]] | ||
| + | * [[TL-277]] | ||
| + | * [[TL-278]] | ||
| + | * [[TL-279]] | ||
| + | * [[TL-280]] | ||
| + | * [[TL-281]] | ||
| + | * [[TL-282]] | ||
| + | * [[TL-283]] | ||
| + | * [[TL-284]] | ||
| + | * [[TL-285]] | ||
| + | * [[TL-286]] | ||
| + | * [[TL-287]] | ||
| + | * [[TL-288]] | ||
| + | * [[TL-289]] | ||
| + | * [[TL-290]] | ||
| + | * [[TL-291]] | ||
| + | * [[TL-292]] | ||
| + | * [[TL-293]] | ||
| + | * [[TL-294]] | ||
| + | * [[TL-295]] | ||
| + | * [[TL-296]] | ||
| + | * [[TL-297]] | ||
| + | * [[TL-298]] | ||
| + | * [[TL-299]] | ||
| + | * [[TL-300]] | ||
| + | |||
| + | (jumps to JETDS nomenclature) | ||
| + | |||
| + | * [[TL-310]]/U tube puller | ||
| + | * [[TL-320]]/U petrol blow torch | ||
| + | * [[TL-338]]/U vice | ||
| + | * [[TL-547]]/U goggles | ||
| + | * [[TL-608]]/U blowtorch | ||
| + | (jumps to JETDS nomenclature) | ||
| + | |||
| + | ==references== | ||
| + | |||
| + | |||
| + | [[Category:Equipment Group]] | ||
Latest revision as of 17:57, 23 October 2024
Tools (Note (NIC) = not in 1920 catalogue)
- TL-1 screwdriver, 3 1/2-inch
- TL-2 screwdriver 4-inch
- TL-3 (NIC) Stone, Carborundum, medium India, No. 53
- TL-4 screwdriver 5-inch
- TL-5 file
- TL-6 wrench, double open end, 3-inch, 0.193-inch, 0.385-inch
- TL-7 gauge
- TL-8, wrench 4-inch
- TL-9 file, 4-inch warding
- TL-10 File (6Q37110) flat bastard, 6-inch
- TL-11 ?
- TL-12, plyers, round nose, side cutting, 6-inch
- TL-13 ? (not in 1920 cat.) small lineman's pliers
- TL-14 handle, file
- TL-15 ?
- TL-16 ?
- TL-17 wrench 9-inch
- TL-18 puller
- TL-19 pliers, combination 6-inch
- TL-20 pliers, combination 8-inch
- TL-21 screwdriver 6 1/2-inch
- TL-22 (NIC) Screwdriver, 4-inch flat tip, 6R15120.
- TL-23 (NIC) screwdriver, 7-inch
- TL-24 pliers, side cutting, 4-inch
- TL-25 screwdriver, jewelers
- TL-26 tape, 1/4-inch, cotton, for cable splicing. 1.000 yards
- TL-27 screwdriver
- TL-28 screwdriver
- TL-29 knife
- TL-30 file like TL-5 but with bent handle
- TL-31, square, combination bevel and level
- TL-32, calipers, outside,
- TL-33
- TL-34
- TL-35, speed indicator
- TL-36
- TL-37
- TL-38, hammer, ball peen, 12-Oz.
- TL-39, (NIC) hammer, claw, 1-Lb.
- TL-40, screw driver, 8 1/2-inch
- TL-41
- TL-42
- TL-43
- TL-44, Screwdriver 13 1/2-inchP/O TE-36
- TL-45, soldering iron, 1.5 Lb.
- TL-46 (NIC) soldering iron jewlers
- TL-47, chisels, cold 1/2-inch
- TL-48, chisels, cold 3/4-inch
- TL-49, center punch, 4-inch
- TL-50
- TL-51, wrench, 6-inch
- TL-52, wrench, 8-inch
- TL-53
- TL-54, wrench, monkey 6-inch
- TL-55, wrench, stillson, 14-inch
- TL-56
- TL-57
- TL-58
- TL-59,tap and die set
- TL-60, pliers diagonal, 6-inch
- TL-61
- TL-62, pliers, diagonal, 3 1/2-inch
- TL-63, Bits, expansion, 7/8 to 3-inch,
- TL-64, tinners snips
- TL-65
- TL-66 (NIC) torch
- TL-67, hand drill 3/8-inch
- TL-68, tool roll 10 assorted files
- TL-69, tool roll, open end wrench's
- TL-70, tool roll, assorted drills and reamers
- TL-71, test clips
- TL-72 (NIC) brush camels-hair, flat
- TL-73, Lathes, metal working, 30-inch bed.
- TL-74
- TL-75
- TL-76
- TL-77
- TL-78
- TL-79
- TL-80
- TL-81, drift pin,
- TL-82, wrench, alligator 10-inch
- TL-83 tape 3/4-inch friction
- TL-84 wrench, spanner, for BC-47 nuts
- TL-85 wrench, double end,
- TL-86 ?
- TL-87 pliers, pointed nose, 4 3/8-inch
- TL-88 wrench, double end,
- TL-89 ?
- TL-90 cable dresser
- TL-91 ?
- TL-92 socket wrench
- TL-93 (NIC) rubber tape
- TL-94 tape, rubber
- TL-95 flashlight, fiber case, BA-1, 8 1/4" x 1 1/2 "
- TL-96 tap and die set
- TL-97 ? bandage ? P/O TE-56
- TL-98 drift pin
- TL-99 drift pin
( NOTE 1920 signal corps catalogue ends here )
- TL-100, wrench RE-12
- TL-101
- TL-102 pliers,
- TL-103 pliers, diagonal cutting 5-inch TE-6, TE-36
- TL-104 saw, hand 26-inch
- TL-105 screwdriver
- TL-106 screwdriver
- TL-107 pliers, side cutting, 8-inch
- TL-108 nut driver, 6-inch, 3/8-inch head
- TL-109 tape, cotton, 1-inch.
- TL-110 spring loaded alligator clip
- TL-111 6 inch adjustable wrench, Crescent #A-16
- TL-112 10 inch adjustable wrench, Crescent #A-110
- TL-113, 4-inch blade, flat tip, with flip out "T" hammer handle, P/O SCR-132
- TL-114
- TL-115
- TL-116 Electrician's Knife, (prototypes only)
- TL-117 electric soldering iron
- TL-118
- TL-119 pliers, side cutting, 5-inch, P/O TE-5
- TL-120 electric soldering iron
- TL-121 electric soldering iron
- TL-122 flashlight
- TL-123
- TL-124 bandage, cable splicing
- TL-125 pliers, gas, combination screwdriver handle, TE-15, TE-44
- TL-126 pliers, long chain nosed, 6-inch,
- TL-127 gage TL-127 is provided with the generator in order to measure the regulator clearances TM 11-231
- TL-128 screwdriver set
- TL-129 saw, cross-cut,
- TL-130 torch
- TL-131 jewelers soldering iron
- TL-132, Soldering iron P/O TE-36
- TL-133 file 6-inch round
- TL-134
- TL-135 axe
- TL-136
- TL-137 clip electric, TS-27 test set
- TL-138 Alignment tool
- TL-139 soldering iron
- TL-140
- TL-141
- TL-142
- TL-143 sleeve rolling tool
- TL-144 Gage, linemans climber
- TL-145
- TL-146
- TL-147
- TL-148
- TL-149
- TL-150 Alignment Tool
- TL-151
- TL-152
- TL-153
- TL-154
- TL-155
- TL-156
- TL-157
- TL-158
- TL-159
- TL-160
- TL-161
- TL-162, Block, and 25 Ft. 3/8th manilla rope.
- TL-163
- TL-164
- TL-165
- TL-166
- TL-167
- TL-168
- TL-169
- TL-170
- TL-171
- TL-172
- TL-173
- TL-174
- TL-175
- TL-176
- TL-177
- TL-178
- TL-179
- TL-180
- TL-181
- TL-182
- TL-183
- TL-184
- TL-185
- TL-186
- TL-187
- TL-188
- TL-189, sleeve compressing tool
- TL-190
- TL-191
- TL-192 tape 3/4-inch rubber
- TL-193
- TL-194
- TL-195 punch and anvil set AN~MPM-1
- TL-196 punch and anvil set AN~MPM-1
- TL-197
- TL-198
- TL-199
- TL-200
- TL-201 tube puller
- TL-202
- TL-203
- TL-204 Wrench, special tool, to adjust jack fastener on telephone switchboards, 18-inches long with wooden handles, and swivel head. PO. TE-44.
- TL-205
- TL-206
- TL-207
- TL-208
- TL-209
- TL-210
- TL-211
- TL-212
- TL-213
- TL-214 flashlight (beacon) for drop bag BG-121
- TL-215 handle
- TL-216 hammer
- TL-217 sleeve compressing tool
- TL-218
- TL-219 miniature tube socket tool, P/O I-56 test set
- TL-220 miniature tube pin die, P/O I-56 test set
- TL-221
- TL-222
- TL-223
- TL-224
- TL-225
- TL-226
- TL-227
- TL-228
- TL-229
- TL-230
- TL-231
- TL-232
- TL-233
- TL-234
- TL-235
- TL-236
- TL-237
- TL-238
- TL-239
- TL-240
- TL-241
- TL-242
- TL-243
- TL-244
- TL-245
- TL-246
- TL-247
- TL-248
- TL-249
- TL-250
- TL-251
- TL-252
- TL-253
- TL-254
- TL-255
- TL-256
- TL-257
- TL-258
- TL-259
- TL-260
- TL-261
- TL-262
- TL-263
- TL-264
- TL-265
- TL-266
- TL-267
- TL-268
- TL-269
- TL-270
- TL-271
- TL-272
- TL-273
- TL-274
- TL-275
- TL-276
- TL-277
- TL-278
- TL-279
- TL-280
- TL-281
- TL-282
- TL-283
- TL-284
- TL-285
- TL-286
- TL-287
- TL-288
- TL-289
- TL-290
- TL-291
- TL-292
- TL-293
- TL-294
- TL-295
- TL-296
- TL-297
- TL-298
- TL-299
- TL-300
(jumps to JETDS nomenclature)
(jumps to JETDS nomenclature)