Difference between revisions of "LS-166"
Jump to navigation
Jump to search
RadioNerds (talk | contribs) |
|
(No difference)
|
Latest revision as of 00:19, 11 September 2017
The LS-166/U is used with the older style military radio sets which have a U-79/U audio connector. This is a standard magnetic speaker at 8 ohms at 3 watts. The speaker inclosure includes a 8:600 Ohm transformer to match the radio to the speaker. It has a switch located on the side to switch it between vehicle use and manpack. The connecting cord is terminated with the older style U-77/U connector.
You often find these speakers with the newer U-229 connector. It was quite common to cut off the old connector and replace it with a new one. Fundamentally though this speaker was not used with the new gear using the U-229 from the factory.
Images
Specifications
- PHYSICAL DESCRIPTION
- Cone Diameter - 4 inches (101.60 mm)
- Mounting Dimensions - Adjustable mounting bracket with two 9/32 inch diameter holes spaced 1-1/2 inch C to C
- Plug - U-77/U
- Over-all Dimensions
- Length - 7-1/32 inches (178. 59 mm)
- Width - 5-21/32 inches (143.67 mm)
- Depth - 3-5/16 inches (84. 14 mm)
- ADDITIONAL PHYSICAL DATA
- Case Material - Metal
- TECHNICAL DESCRIPTION
- INPUT
- Voice coil impedance - 8 ohms
- Power handling rating - 2 watts (warble tones)
- Frequency range - 300 to 7,000 cps
- Transformer Data - 600 ohms primary impedance
- Environmental Data
- Operating Conditions:
- Temperature - From -65 deg F to + 160 deg F
- Elevation - 5,000 feet above sea level
- Relative Humidity - 95 percent
- Non-operating Conditions:
- Temperature - From -80 deg F to + 160 deg F for 72 hours
- Elevation - 50, 000 feet above sea level
- Relative Humidity - 100 percent
Schematic
Related Files
- OPERATOR'S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS
- SPECIAL TOOLS LISTS (INCLUDING DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS)
- DYNAMIC LOUDSPEAKER
- LS-166/U
- 31 July 1973
- MIL-L-12632
- MSS 5965-6