Difference between revisions of "LS-166"
Jump to navigation
Jump to search
RadioNerds (talk | contribs) |
RadioNerds (talk | contribs) |
||
| Line 2: | Line 2: | ||
You often find these speakers with the newer U-229 connector. It was quite common to cut off the old connector and replace it with a new one. Fundamentally though this speaker was not used with the new gear using the U-229 from the factory. | You often find these speakers with the newer U-229 connector. It was quite common to cut off the old connector and replace it with a new one. Fundamentally though this speaker was not used with the new gear using the U-229 from the factory. | ||
| + | |||
| + | |||
[[File:LS-166_front.JPG|600px]] | [[File:LS-166_front.JPG|600px]] | ||
| − | LS-166_back.JPG | + | |
| − | LS-166_Inside.JPG | + | <gallery widths=100px heights=100px perrow=5> |
| − | LS-166_left.JPG | + | File:LS-166_back.JPG |
| − | LS-166_schematic.JPG | + | File:LS-166_Inside.JPG |
| − | LS-166_top.JPG | + | File:LS-166_left.JPG |
| + | File:LS-166_schematic.JPG | ||
| + | File:LS-166_top.JPG | ||
| + | </gallery> | ||
Revision as of 18:12, 12 April 2012
The LS-166/U is used with the older style military radio sets which have a U-79/U audio connector. This is a standard magnetic speaker at 8 ohms at 3 watts. The speaker inclosure includes a 8:600 Ohm transformer to match the radio to the speaker. It has a switch located on the side to switch it between vehicle use and manpack. The connecting cord is terminated with the older style U-77/U connector.
You often find these speakers with the newer U-229 connector. It was quite common to cut off the old connector and replace it with a new one. Fundamentally though this speaker was not used with the new gear using the U-229 from the factory.
