Difference between revisions of "User:BinD"
Jump to navigation
Jump to search
| Line 29: | Line 29: | ||
* [[FT-15]] Adapter French vacuume tubes to American equipment | * [[FT-15]] Adapter French vacuume tubes to American equipment | ||
* [[FT-16]] Frame, metal for mounting [[SCR-84]] in airplane | * [[FT-16]] Frame, metal for mounting [[SCR-84]] in airplane | ||
| − | * [[FT-17]] | + | * [[FT-17]] Mounting, for condenser, P/O [[SCR-73]] |
* [[FT-18]] Mounting, generator, sheet metal, JN-4-H jenny | * [[FT-18]] Mounting, generator, sheet metal, JN-4-H jenny | ||
* [[FT-19]] Mounting, sheet metal frame for mounting grid leak resistance and condenser | * [[FT-19]] Mounting, sheet metal frame for mounting grid leak resistance and condenser | ||
Revision as of 21:24, 13 January 2014
hi and stuff
- vehicle shown is T-4 Armored car. Circa-1933
- Reciever shown is BC-189
- FT-1 Fitting, wooden key battens and sliding shelf. for keys, set box, and battery for SCR-65 in JN jenny
- FT-2
- FT-3
- FT-4 Mounting, generator, 2 wooden blocks and steel screws 6-7/8 X 9-1/2 inches, for curtis JN aeroplane.
- FT-5 Adapter, american vacuume tubes to French equipment
- FT-6 Bracket, mounting, for BC-11, or BC-12
- FT-7 Mounting, generator, aluminum casting for JN-4-D, JN-4-D jenny
- FT-8 Mounting, generator, aluminum casting for JN-4
- FT-9 Fastener, cast iron tent slide for guy rope
- FT-10 fixture portable desk lamp, and clamp, for use in 6-ton tank.
- FT-11
- FT-12
- FT-13 Holder, for compass I-14, lower end of mast loop LP-1
- FT-14
- FT-15 Adapter French vacuume tubes to American equipment
- FT-16 Frame, metal for mounting SCR-84 in airplane
- FT-17 Mounting, for condenser, P/O SCR-73
- FT-18 Mounting, generator, sheet metal, JN-4-H jenny
- FT-19 Mounting, sheet metal frame for mounting grid leak resistance and condenser
- FT-20 Mounting, sheet metal frame for inked cardboard resistor.
- FT-21
- FT-22 Mounting, for condensers
- FT-23
- FT-24
- FT-25
- FT-26
- FT-27
- FT-28
- FT-29
- FT-30
- FT-31
- FT-32
- FT-33
- FT-34
- FT-35
- FT-36
- FT-37
- FT-38
- FT-39
- FT-40
- FT-41
- FT-42
- FT-43
- FT-44
- FT-45
- FT-46
- FT-47
- FT-48
- FT-49
- FT-50
- FT-51
- FT-52
- FT-53 Adapter, wood used with FT-54 TN-1 (tent) P/O SCR-49
- FT-54 Adapter, wood used with TN-1 (tent) P/O SCR-49
- FT-55 Adapter, 31 inch spruce, X 2-1/2 Dia. for MS-2, TN-1 (tent) P/O SCR-49
- FT-56
- FT-57 Bracket, iron skeleton for gong M-57 or M-59, and bell mechanism
- FT-58 Bracket, iron skeleton for gong M-57 or M-59, and bell mechanism ect.
- FT-59 Mounting, buzzer used in target range signaling system
- FT-60
- FT-61 Bracket, iron triangle for teleautograph.
- FT-62
- FT-63
- FT-64 Mounting, generator, steel SCR-73 to strut of De Haviland plane.
- FT-65 Adapter, for VT-5 tube, SO-2 socket
- FT-66
- FT-67
- FT-68
- FT-69
- FT-70
- FT-71
- FT-72
- FT-73
- FT-74
- FT-75
- FT-76
- FT-77
- FT-78
- FT-79
- FT-80
- FT-81
- FT-82
- FT-83
- FT-84
- FT-85
- FT-86
- FT-87
- FT-88
- FT-89
- FT-90
- FT-91
- FT-92
- FT-93
- FT-94
- FT-95
- FT-96
- FT-97
- FT-98
- FT-99
- FT-100
Related Files
- Remote Control Equipment
- RC-261
- 28 Oct. 1944