Difference between revisions of "MT-1029~VRC"
Jump to navigation
Jump to search
RadioNerds (talk | contribs) |
RadioNerds (talk | contribs) |
||
| Line 10: | Line 10: | ||
;Proper Power Pin inside the MT-1029 for Remote Operation | ;Proper Power Pin inside the MT-1029 for Remote Operation | ||
[[File:VRC Remote Power.png|600px]] | [[File:VRC Remote Power.png|600px]] | ||
| + | |||
| + | |||
| + | [[Category:Military/Mounts]] | ||
Revision as of 18:48, 22 May 2013
MT-1029 MOUNT for transceivers RT-246, RT-524/VRC, VRC-53, VRC-64, etc . With a 4 pin plug for the power supply cable.
Configure for "remote" power control from the VIC1
If you have a VIC1 connected to the VRC series radios, it is possible to control the radio power via the VIC1. In this case you would also power the AM-1780 via the mount.. This frees up the "C" RX port so you can add another receiver.
- Proper Power Pin inside the MT-1029 for Remote Operation
