Integrating the VIC-1 with other equipment

Integrating the VIC 1 with other equipment is quite easy really.. there are some common connections that can be used.

NOTE: One very important thing to note is that the VIC1 is 24 Volt and most Civilian radios are 12 Volt, you need to isolate them from each other if they are on connected to the system.

SEE AM-1780 for Jack details

TX / RX

J501 or J503 must be used, they use the CX-4723 - 18 Pin Cable.

RX only

J508 or J510

Common integration Diagrams

Civilian Radio Connections to A (J501) or C (J503)

Civilian Radio Connection to C-RX (J508)