MT-1029/VRC
Revision as of 00:04, 7 November 2013 by RadioNerds (talk | contribs) (RadioNerds moved page MT-1029/VRC to MT-1029~VRC without leaving a redirect)
MT-1029 MOUNT for transceivers RT-246, RT-524/VRC, VRC-53, VRC-64, etc . With a 4 pin plug for the power supply cable.
Configure for "remote" power control from the VIC1
If you have a VIC1 connected to the VRC series radios, it is possible to control the radio power via the VIC1. In this case you would also power the AM-1780/VRC via the mount.. This frees up the "C" RX port so you can add another receiver.
- Proper Power Pin inside the MT-1029 for Remote Operation
