AM-1780~VRC

From RadioNerds
Revision as of 16:03, 19 October 2011 by RadioNerds (talk | contribs) (Created page with "==Description== The main junction box for the AN/VIC-1. Provides control of the dc power to the associated crew member control boxes and to the radio system that may be connected...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Description

The main junction box for the AN/VIC-1. Provides control of the dc power to the associated crew member control boxes and to the radio system that may be connected to the amplifiers. The amplifiers also amplify and control the audio signals in the intercommunication (intercom) and radio circuits. The AM-1780 also allows connection of 2-wire telephone equipment, or direct 2-wire connection between similarly equipped vehicles via binding post connectors.

File:AM-1780.png


Switch Settings

AM-1780-switches.png

MAIN POWER (1)
NORM
Intercom and all radios configured for remote control power. Requires install mode "OTHER". Power comes in J501 (A radio) jack. Switched power is returned back to A radio on pin D. (May also be sent on J503)
INT ONLY
No power provided to radios configured for remote control power.
OFF
Intercom and radios configured for remote power turned off. Audio is still enabled and functions in headsets. There is a direct connection from speaker audio to the headsets.

POWER CKT BKR (2)

ON
Power is applied to the AM-1780
OFF
Circuit breaker has tripped or is turned off. This does not turn off radios that are configured for remote power.


POWER (3)

Power indicator lamp


INT ACCENT (4)

ON
Radio receive volume is reduced when intercom keyed.
OFF
Radio receive volume is not reduced when intercom keyed.


RADIO TRANS (5)

CDR+CREW
Allows any station to key radio
CDR ONLY
Only commander can key radio
LISTENING SILENCE
Radio transmission is disabled


INSTALLATION SWITCH (6)

INT ONLY
Used when no radios are installed, Power comes in through J508. Radio functions are not active.
OTHER
Normal install position for use with radios, Power comes in through J501 (A radio) connection. Radio and PTT functions are active.
RETRANS
Same as "OTHER" except retransmission is enabled. Requires C-2299 module be installed.


Jack Functions

AM-1780-1.png


J501
"A" Radio connection. Also supplies power to AM-1780 in "OTHER" mode.
J503
"C" radio connection
J504
Commander Control Box, Independent of Crew connections (J505-J507)
J505
Crew Intercom Control Box, Paralleled with other crew jacks (J505, J506, J507)
J506
Crew Intercom Control Box, Paralleled with other crew jacks (J505, J506, J507)
J507
Crew Intercom Control Box, Paralleled with other crew jacks (J505, J506, J507)
J508
Power connection when in "INT ONLY" mode or C RX radio in "OTHER" mode
J509
C-2299 Retransmission connection
J510
"B" Radio (RX only) connection
J511
C-2299 Retransmission connection

Integration