Difference between revisions of "C-2296~VRC"

From RadioNerds
Jump to navigation Jump to search
 
Line 1: Line 1:
 
===Overview===
 
===Overview===
This intercom control is mounted outside the vehicle and provides communications to the radio set in the vehicle, and with personnel inside the vehicle.
+
The C-2296/VRC is installed in a waterproof box, outside the vehicle (usually tanks). It comes with an [[H-207~VRC|H-207/VRC]] attached. The C-2296/VRC must be connected to a [[C-2297~VRC|C-2297/VRC]] (through vehicle wiring).
  
the control has a handset [[H-207/VRC]], connected to the case. Operating controls and a pair of binding posts for connecting telephone lines are located in the front.
+
 
 +
[[File:C-2296_VRC.png|400px]]
 +
 
 +
 
 +
* '''J61''' - Provides connection, in parallel, to the driver’ s C-2297/VRC through vehicle wiring.
 +
* '''J62''' - Provides connection to the external signal lamp, attached to the waterproof box.
 +
* '''RAD TRANS-INT''' - Functions only if C-2297/VRC has EXT selected. In the INT position the operator will monitor the audio selected by the driver’s C-2297/VRC, and may key the intercom. In the spring loaded RAD TRANS position, the operator may key the radio (selected by the driver).
 +
* '''VOLUME''' - Adjusts the loudness of the audio signal heard at the H-207/VRC.
 +
* '''Key switch''' - The key switch on the H-207/VRC is used to key the radio or intercom set. It is also used to flash the light on the driver’s C-2297/VRC, if he has selected OFF on the SIG-E XT-OFF switch, by pressing and releasing the switch.
  
  
 
[[Category:Military/Intercoms]]
 
[[Category:Military/Intercoms]]
 
{{DISPLAYTITLE:C-2296/VRC}}
 
{{DISPLAYTITLE:C-2296/VRC}}

Latest revision as of 11:55, 29 November 2013

Overview

The C-2296/VRC is installed in a waterproof box, outside the vehicle (usually tanks). It comes with an H-207/VRC attached. The C-2296/VRC must be connected to a C-2297/VRC (through vehicle wiring).


C-2296 VRC.png


  • J61 - Provides connection, in parallel, to the driver’ s C-2297/VRC through vehicle wiring.
  • J62 - Provides connection to the external signal lamp, attached to the waterproof box.
  • RAD TRANS-INT - Functions only if C-2297/VRC has EXT selected. In the INT position the operator will monitor the audio selected by the driver’s C-2297/VRC, and may key the intercom. In the spring loaded RAD TRANS position, the operator may key the radio (selected by the driver).
  • VOLUME - Adjusts the loudness of the audio signal heard at the H-207/VRC.
  • Key switch - The key switch on the H-207/VRC is used to key the radio or intercom set. It is also used to flash the light on the driver’s C-2297/VRC, if he has selected OFF on the SIG-E XT-OFF switch, by pressing and releasing the switch.