CX-7058~VRC

From RadioNerds
Revision as of 01:42, 15 October 2013 by RadioNerds (talk | contribs) (RadioNerds moved page CX-7058/VRC to CX-7058~VRC)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

CX-7058-VRC.png


Common Usage

This cable is used to connect AUX radios for receive only audio, to "C-RX" on J508 (Which is power port when the device isnt used with the complete VRC series radio mounts) of the AM-1780/VRC

This is an excellent place to insert IPOD, external audio type sources.

Pinouts

Single problem hot 32x32.png
Use Caution with this Information
The Information contained in this section is considered Experimental


NOTE: Wire colors could change between manufacturers, always verify by the PIN ID Letter


A
B
C
D - Switched +V, this pin goes +Voltage when the AM-1780/VRC is turned on
E
F
H - Receive Audio (Speaker)
J
K - Receive Audio (Fixed Volume)