MT-1029/VRC

From RadioNerds
Revision as of 00:04, 7 November 2013 by RadioNerds (talk | contribs) (RadioNerds moved page MT-1029/VRC to MT-1029~VRC without leaving a redirect)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

MT-1029 MOUNT for transceivers RT-246, RT-524/VRC, VRC-53, VRC-64, etc . With a 4 pin plug for the power supply cable.

MT-1029-VRC.png


Configure for "remote" power control from the VIC1

If you have a VIC1 connected to the VRC series radios, it is possible to control the radio power via the VIC1. In this case you would also power the AM-1780/VRC via the mount.. This frees up the "C" RX port so you can add another receiver.

Proper Power Pin inside the MT-1029 for Remote Operation

VRC Remote Power.png