RE-12

From RadioNerds
Revision as of 16:14, 31 August 2019 by BinD (talk | contribs) (Created page with "1 Equipment, Type RE-12; radio: ==Components== * 2 contacts, Type CN–8—buzzer, movable contact; 1 in use, 1 spare. * 4 contacts, Type CN-9—buzzer, fixed contacts; 2 in ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

1 Equipment, Type RE-12; radio:

Components

  • 2 contacts, Type CN–8—buzzer, movable contact; 1 in use, 1 spare.
  • 4 contacts, Type CN-9—buzzer, fixed contacts; 2 in use, 2 spare.
  • 2 contacts, Type CN-13—control switch, spring with silver contact; pairs with contact Type CN-14; 1 in use, 1 spare.
  • 2 contacts, Type CN-14—control switch, bracket with silver contact; pairs with contact Type CN-13; 1 in use, 1 spare.
  • 2 contacts, Type CN-15-key, screw with silver contact; pairs with contact Type CN–16; 1 in use, 1 spare.
  • 2 contacts, Type CN-16—key, spring with silver contact; pairs with contact Type CN-15; 1 in use, 1 spare.
  • 3 contacts, Type M-14—detector, spring contact; 1 in use, 2 spare.
  • 1 cord, Type CD-95—10-volt leads, battery to Operating chest.
  • 1 cord, Type CD-96—amplifier leads from operating chest to amplifier.
  • 4 crystals, type DC-1—detector, mounted galena; 1 in use, 3 spare.
  • 1 file, 34 inches, single cut, flat needle.
  • 1 head set, Type P—11—used with amplifier.
  • 1 head set, Type HS-11—used with operating chest.
  • 1 operating chest, Type BC–53—A.
  • 1 plier, pair, side cutting, 4-inch.
  • 1 screw driver, 13-inch blade, 1/8-inch tip.
  • 6 separators, Type IN–9—mica, for quenched gap; 2 in use, 4 spare.
  • 1 wrench, Type TL-100—buzzer contacts.