Difference between revisions of "TL - Tools"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
Tools (Note (NIC) = not in 1920 catalogue) | Tools (Note (NIC) = not in 1920 catalogue) | ||
| − | * [[TL-1]] screwdriver | + | * [[TL-1]] screwdriver, 3 1/2-inch |
* [[TL-2]] screwdriver 4-inch | * [[TL-2]] screwdriver 4-inch | ||
* [[TL-3]] (NIC) Stone, Carborundum, medium India, No. 53 | * [[TL-3]] (NIC) Stone, Carborundum, medium India, No. 53 | ||
| Line 9: | Line 9: | ||
* [[TL-7]] gauge | * [[TL-7]] gauge | ||
* [[TL-8]] ? | * [[TL-8]] ? | ||
| − | * [[TL-9]] | + | * [[TL-9]] file, 4-inch warding |
* [[TL-10]] File (6Q37110) flat bastard, 6-inch | * [[TL-10]] File (6Q37110) flat bastard, 6-inch | ||
* [[TL-11]] ? | * [[TL-11]] ? | ||
| − | * [[TL-12]] | + | * [[TL-12]], plyers, round nose, side cutting, 6-inch |
* [[TL-13]] ? (not in 1920 cat.) small lineman's pliers | * [[TL-13]] ? (not in 1920 cat.) small lineman's pliers | ||
* [[TL-14]] handle, file | * [[TL-14]] handle, file | ||
| Line 23: | Line 23: | ||
* [[TL-21]] screwdriver 6 1/2-inch | * [[TL-21]] screwdriver 6 1/2-inch | ||
* [[TL-22]] (NIC) Screwdriver, 4-inch flat tip, 6R15120. | * [[TL-22]] (NIC) Screwdriver, 4-inch flat tip, 6R15120. | ||
| − | * [[TL-23]] (NIC) screwdriver | + | * [[TL-23]] (NIC) screwdriver, 7-inch |
* [[TL-24]] pliers, side cutting, 4-inch | * [[TL-24]] pliers, side cutting, 4-inch | ||
* [[TL-25]] screwdriver, jewelers | * [[TL-25]] screwdriver, jewelers | ||
| Line 30: | Line 30: | ||
* [[TL-28]] screwdriver | * [[TL-28]] screwdriver | ||
* [[TL-29]] knife | * [[TL-29]] knife | ||
| − | * [[TL-30]] file | + | * [[TL-30]] file like TL-5 but with bent handle |
* [[TL-31]] | * [[TL-31]] | ||
| − | * [[TL-32]] | + | * [[TL-32]], calipers, outside, |
* [[TL-33]] | * [[TL-33]] | ||
* [[TL-34]] | * [[TL-34]] | ||
| Line 38: | Line 38: | ||
* [[TL-36]] | * [[TL-36]] | ||
* [[TL-37]] | * [[TL-37]] | ||
| − | * [[TL-38]] | + | * [[TL-38]], hammer, ball peen, 12-Oz. |
* [[TL-39]], (NIC) hammer, claw, 1-Lb. | * [[TL-39]], (NIC) hammer, claw, 1-Lb. | ||
| − | * [[TL-40]] | + | * [[TL-40]], screw driver, 8 1/2-inch |
* [[TL-41]] | * [[TL-41]] | ||
* [[TL-42]] | * [[TL-42]] | ||
* [[TL-43]] | * [[TL-43]] | ||
| − | * [[TL-44]], Screwdriver | + | * [[TL-44]], Screwdriver 13 1/2-inchP/O [[TE-36]] |
* [[TL-45]] | * [[TL-45]] | ||
* [[TL-46]] (NIC) soldering iron | * [[TL-46]] (NIC) soldering iron | ||
| − | * [[TL-47]] | + | * [[TL-47]], chisels, cold 1/2-inch |
| − | * [[TL-48]] | + | * [[TL-48]], chisels, cold 3/4-inch |
| − | * [[TL-49]] | + | * [[TL-49]], center punch, 4-inch |
* [[TL-50]] | * [[TL-50]] | ||
* [[TL-51]] | * [[TL-51]] | ||
| Line 60: | Line 60: | ||
* [[TL-58]] | * [[TL-58]] | ||
* [[TL-59]] | * [[TL-59]] | ||
| − | * [[TL-60]] | + | * [[TL-60]], pliers diagonal, 6-inch |
* [[TL-61]] | * [[TL-61]] | ||
| − | * [[TL-62]] | + | * [[TL-62]], pliers, diagonal, 3 1/2-inch |
| − | * [[TL-63]] | + | * [[TL-63]], Bits, expansion, 7/8 to 3-inch, |
| − | * [[TL-64]] | + | * [[TL-64]], tinners snips |
* [[TL-65]] | * [[TL-65]] | ||
* [[TL-66]] (NIC) torch | * [[TL-66]] (NIC) torch | ||
| − | * [[TL-67]] | + | * [[TL-67]], hand drill 3/8-inch |
* [[TL-68]] | * [[TL-68]] | ||
* [[TL-69]] | * [[TL-69]] | ||
| Line 73: | Line 73: | ||
* [[TL-71]] | * [[TL-71]] | ||
* [[TL-72]] (NIC) brush camels-hair, flat | * [[TL-72]] (NIC) brush camels-hair, flat | ||
| − | * [[TL-73]] | + | * [[TL-73]], Lathes, metal working, 30-inch bed. |
* [[TL-74]] | * [[TL-74]] | ||
* [[TL-75]] | * [[TL-75]] | ||
Revision as of 17:47, 12 August 2023
Tools (Note (NIC) = not in 1920 catalogue)
- TL-1 screwdriver, 3 1/2-inch
- TL-2 screwdriver 4-inch
- TL-3 (NIC) Stone, Carborundum, medium India, No. 53
- TL-4 screwdriver 5-inch
- TL-5 file
- TL-6 wrench, double open end, 3-inch, 0.193-inch, 0.385-inch
- TL-7 gauge
- TL-8 ?
- TL-9 file, 4-inch warding
- TL-10 File (6Q37110) flat bastard, 6-inch
- TL-11 ?
- TL-12, plyers, round nose, side cutting, 6-inch
- TL-13 ? (not in 1920 cat.) small lineman's pliers
- TL-14 handle, file
- TL-15 ?
- TL-16 ?
- TL-17 ?
- TL-18 puller
- TL-19 pliers, combination 6-inch
- TL-20 pliers, combination 8-inch
- TL-21 screwdriver 6 1/2-inch
- TL-22 (NIC) Screwdriver, 4-inch flat tip, 6R15120.
- TL-23 (NIC) screwdriver, 7-inch
- TL-24 pliers, side cutting, 4-inch
- TL-25 screwdriver, jewelers
- TL-26 tape, 1/4-inch, cotton, for cable splicing. 1.000 yards
- TL-27 screwdriver
- TL-28 screwdriver
- TL-29 knife
- TL-30 file like TL-5 but with bent handle
- TL-31
- TL-32, calipers, outside,
- TL-33
- TL-34
- TL-35
- TL-36
- TL-37
- TL-38, hammer, ball peen, 12-Oz.
- TL-39, (NIC) hammer, claw, 1-Lb.
- TL-40, screw driver, 8 1/2-inch
- TL-41
- TL-42
- TL-43
- TL-44, Screwdriver 13 1/2-inchP/O TE-36
- TL-45
- TL-46 (NIC) soldering iron
- TL-47, chisels, cold 1/2-inch
- TL-48, chisels, cold 3/4-inch
- TL-49, center punch, 4-inch
- TL-50
- TL-51
- TL-52
- TL-53
- TL-54
- TL-55
- TL-56
- TL-57
- TL-58
- TL-59
- TL-60, pliers diagonal, 6-inch
- TL-61
- TL-62, pliers, diagonal, 3 1/2-inch
- TL-63, Bits, expansion, 7/8 to 3-inch,
- TL-64, tinners snips
- TL-65
- TL-66 (NIC) torch
- TL-67, hand drill 3/8-inch
- TL-68
- TL-69
- TL-70
- TL-71
- TL-72 (NIC) brush camels-hair, flat
- TL-73, Lathes, metal working, 30-inch bed.
- TL-74
- TL-75
- TL-76
- TL-77
- TL-78
- TL-79
- TL-80
- TL-81
- TL-82 drift pin
- TL-83 tape 3/4-inch friction
- TL-84 wrench, spanner, for BC-47 nuts
- TL-85 wrench, double end,
- TL-86 ?
- TL-87 pliers,pointed nose, 4 3/8-inch
- TL-88 wrench, double end,
- TL-89 ?
- TL-90 cable dresser
- TL-91 ?
- TL-92 socket wrench
- TL-93 (NIC) rubber tape
- TL-94 tape, rubber
- TL-95 flashlight, fiber case, BA-1, 8 1/4" x 1 1/2 "
- TL-96 tap and die set
- TL-97 ? bandage ? P/O TE-56
- TL-98 drift pin
- TL-99 drift pin
( NOTE 1920 signal corps catalogue ends here )
- TL-100, wrench RE-12
- TL-101
- TL-102 pliers,
- TL-103 pliers, diagonal cutting 5-inch TE-6, TE-36
- TL-104 saw, hand 26-inch
- TL-105 screwdriver
- TL-106 screwdriver
- TL-107 pliers, side cutting, 8-inch
- TL-108 nut driver, 6-inch, 3/8-inch head
- TL-109 tape, cotton, 1-inch.
- TL-110 spring loaded alligator clip
- TL-111 6 inch adjustable wrench, Crescent #A-16
- TL-112 10 inch adjustable wrench, Crescent #A-110
- TL-113
- TL-114
- TL-115
- TL-116 Electrician's Knife, (prototypes only)
- TL-117 electric soldering iron
- TL-118
- TL-119 pliers, side cutting, 5-inch, P/O TE-5
- TL-120 electric soldering iron
- TL-121 electric soldering iron
- TL-122 flashlight
- TL-123
- TL-124 bandage, cable splicing
- TL-125 pliers, gas, combination screwdriver handle, TE-15, TE-44
- TL-126 pliers, long chain nosed, 6-inch,
- TL-127 gage TL-127 is provided with the generator in order to measure the regulator clearances TM 11-231
- TL-128 screwdriver set
- TL-129 saw, cross-cut,
- TL-130 torch
- TL-131 jewelers soldering iron
- TL-132, Soldering iron P/O TE-36
- TL-133 file 6-inch round
- TL-134
- TL-135 axe
- TL-136
- TL-137 clip electric, TS-27 test set
- TL-138 Alignment tool
- TL-139 soldering iron
- TL-140
- TL-141
- TL-142
- TL-143 sleeve rolling tool
- TL-144 Gage, linemans climber
- TL-145
- TL-146
- TL-147
- TL-148
- TL-149
- TL-150 Alignment Tool
- TL-151
- TL-152
- TL-153
- TL-154
- TL-155
- TL-156
- TL-157
- TL-158
- TL-159
- TL-160
- TL-161
- TL-162, Block, and 25 Ft. 3/8th manilla rope.
- TL-163
- TL-164
- TL-165
- TL-166
- TL-167
- TL-168
- TL-169
- TL-170
- TL-171
- TL-172
- TL-173
- TL-174
- TL-175
- TL-176
- TL-177
- TL-178
- TL-179
- TL-180
- TL-181
- TL-182
- TL-183
- TL-184
- TL-185
- TL-186
- TL-187
- TL-188
- TL-189
- TL-190
- TL-191
- TL-192 tape 3/4-inch rubber
- TL-193
- TL-194
- TL-195 punch and anvil set AN~MPM-1
- TL-196 punch and anvil set AN~MPM-1
- TL-197
- TL-198
- TL-199
- TL-200
- TL-201 tube puller
- TL-202
- TL-203
- TL-204 Wrench, special tool, to adjust jack fastener on telephone switchboards, 18-inches long with wooden handles, and swivel head. PO. TE-44.
- TL-205
- TL-206
- TL-207
- TL-208
- TL-209
- TL-210
- TL-211
- TL-212
- TL-213
- TL-214 flashlight (beacon) for drop bag BG-121
- TL-215 handle
- TL-216 hammer
- TL-217 sleeve compressing tool
- TL-218
- TL-219 miniature tube socket tool, P/O I-56 test set
- TL-220 miniature tube pin die, P/O I-56 test set
- TL-221
- TL-222
- TL-223
- TL-224
- TL-225
- TL-226
- TL-227
- TL-228
- TL-229
- TL-230
- TL-231
- TL-232
- TL-233
- TL-234
- TL-235
- TL-236
- TL-237
- TL-238
- TL-239
- TL-240
- TL-241
- TL-242
- TL-243
- TL-244
- TL-245
- TL-246
- TL-247
- TL-248
- TL-249
- TL-250
- TL-251
- TL-252
- TL-253
- TL-254
- TL-255
- TL-256
- TL-257
- TL-258
- TL-259
- TL-260
- TL-261
- TL-262
- TL-263
- TL-264
- TL-265
- TL-266
- TL-267
- TL-268
- TL-269
- TL-270
- TL-271
- TL-272
- TL-273
- TL-274
- TL-275
- TL-276
- TL-277
- TL-278
- TL-279
- TL-280
- TL-281
- TL-282
- TL-283
- TL-284
- TL-285
- TL-286
- TL-287
- TL-288
- TL-289
- TL-290
- TL-291
- TL-292
- TL-293
- TL-294
- TL-295
- TL-296
- TL-297
- TL-298
- TL-299
- TL-300
(jumps to JETDS nomenclature)
(jumps to JETDS nomenclature)